The quality of the briquetting is a key factor for the ball forming rate. When it comes to the ball rate of the briquetting, many clients are undoubtedly very concerned. In the production of briquette machine, the speed of briquetting too fast or too slow can not meet the molding requirements, which directly affects the ball rate of briquetting machine, so how should we solve this problem?

Since the 1980s, with the deepening research of material crushing mechanism and analytical methods, two crushing methods, such as impact crushing and press grinding, have appeared in mechanical force crushing, and various new grinding equipment developed from this has developed rapidly.

The 21st century is an era of diversified energy structures. The dominant position of coal in the energy consumption structure will not change, and it is estimated that the demand for coal will increase in the next 20 or 30 years. With the large amount of pulverized coal produced by mechanized coal mining, it is imperative to develop briquette technology.

The briquetting machine is a kind of equipment for pressing powdery materials into shapes. The briquette machine has a wide range of uses, which can fully press various pulverized coal (coking coal, lignite, caking coal, anthracite, etc.), mineral powder, dry powder, slag, and other powdery materials. There are many types of briquette machine, and the power is also different. When choosing, it should be decided according to the output required by customers.

In addition to the high-pressure briquette machine itself fault, installation and debugging of the fault encountered by external equipment are mostly caused.

The briquette machine is mainly used to press various powdery materials such as pulverized coal, coal surface, slime, medium coal, coking coal, coke powder, coke powder, coke, and metallurgical powder cold-pressed pellets into briquettes. It can be produced into a square, spherical, oval, goose egg, round, column, strip, bread, pillow, and other special shapes. Its purpose is to reduce dust, control bulk density, return to utilization, improve transportability, and so on.

It is necessary for daily maintenance and inspection of briquetting equipment in use. Refer to the instructions of our company when delivering goods, pay attention to check whether the installation screw is loose, oil quantity, motor current, bearing heating, V-belt walking, oil cylinder pressure, etc.

Briquetting technology has the advantages of less investment, quick effect, good sulfur fixation effect, high combustion rate, the low carbon content in ash, reduced fuel cost, reduced production cost, etc. Therefore, it has remarkable economic benefits, environmental protection benefits and social benefits.

Briquette machine is a kind of ball-making equipment, which can continuously send all kinds of dry and wet powder to the rolling area through the prepressing device and press the dry and wet powder into balls under the pressure of the rolling area.

Industrial solid waste not only pollutes the environment but also causes huge waste of resources, which is one of the important issues concerned by the comprehensive utilization of resources and environmental protection in the world. Therefore, large enterprises finally explore recycling technology through the successful application of cold briquette technology in solid waste recycling.