The briquette machine is mainly used to press various powdery materials such as pulverized coal, coal surface, slime, medium coal, coking coal, coke powder, coke powder, coke, and metallurgical powder cold-pressed pellets into briquettes. It can be produced into a square, spherical, oval, goose egg, round, column, strip, bread, pillow, and other special shapes. Its purpose is to reduce dust, control bulk density, return to utilization, improve transportability, and so on.

It is necessary for daily maintenance and inspection of briquetting equipment in use. Refer to the instructions of our company when delivering goods, pay attention to check whether the installation screw is loose, oil quantity, motor current, bearing heating, V-belt walking, oil cylinder pressure, etc.

Briquetting technology has the advantages of less investment, quick effect, good sulfur fixation effect, high combustion rate, the low carbon content in ash, reduced fuel cost, reduced production cost, etc. Therefore, it has remarkable economic benefits, environmental protection benefits and social benefits.

Briquette machine is a kind of ball-making equipment, which can continuously send all kinds of dry and wet powder to the rolling area through the prepressing device and press the dry and wet powder into balls under the pressure of the rolling area.

Briquette machine is a kind of ball-making equipment, which can continuously send all kinds of dry and wet powder to the rolling area through the prepressing device and press the dry and wet powder into balls under the pressure of the rolling area.

In the production of briquette machine, the roller sleeve is easily damaged. In industrial use, no matter what kind of briquette machine, and no matter what raw materials are selected, the press roller is the core component, and its quality is directly related to the economic cost and normal production.

The briquette machine can be used to press pulverized coal, iron powder, coking coal, aluminum powder, iron filings, iron scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke powder and other powders.

The briquette machine is a machine that presses powdery substances after stirring. In the process of pressing, it not only depends on the ball press itself but also needs an additive with strong viscosity and not easy to break, that is, a binder.

The internal space of the honeycomb coal briquette machine is limited, and the built-in transformer makes strong and weak currents coexist, thus affecting weak current signals.

The hydraulic protection device of the cold briquette roller press is that the hydraulic pump pumps high-pressure oil into the hydraulic cylinder to make the piston move axially. The front joint head of the piston rod of the carbon powder ball press meets the production pressure requirements on the bearing seat.