The briquettes were made mechanically using a hydraulic press with a compression pressure of 25 MPa without the use of any binder. The characteristics of the investigated bio-coal briquettes, such as density, strength, moisture content, ash content, volatile yield, calorific value, ignition time, burning duration, and burning rate, have good enough values. The fine fraction briquettes compared to the coarse fraction briquettes have a longer burning time (about threefold longer) and a lower burning rate. For all briquettes, an increase in the composition of coal dust results in a rise in the burning time, whereas the burning rate falls.

One of the options for reducing harmful emissions in the production of heat energy is the use of biomass, including in combination with industrial waste (for instance, coal and coke dust). Recent studies demonstrate that a mix of biomass and coal makes it possible to obtain a bio-coal briquette with better characteristics, which is a motivating factor in the search for alternative sources of heat energy from local agricultural waste. The aim of this research is to study the properties of bio-coal briquettes from biomass (sunflower husks and leaves) and industrial waste (coal and coke dust).

Ore powder briquette machine can be used to press pulverized coal, iron powder, coking coal, aluminum powder, iron filings, iron scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke powder, and other powders, powder materials, waste materials, and waste residues. It is widely used in refractory, power plant, metallurgy, chemical industry, energy, transportation, heating, and other industries. It is energy-saving, environment-friendly, convenient for transportation, improves the utilization rate of waste materials, and has good economic and social benefits.

Industrial solid waste not only pollutes the environment but also causes huge waste of resources, which is one of the important issues concerned by the comprehensive utilization of resources and environmental protection in the world. Therefore, large enterprises finally explore recycling technology through the successful application of cold briquette technology in solid waste recycling.